This user manual has been developed to guide the NIMC admin to set up their devices on the Enrolment Mobile Device Management System (EMDMS). The guide will be broken into 2 sections.

1. Onboarding devices on the EMDMS.

2. Managing devices on the EMDMS.

ONBOARDING DEVICES ON THE EMDMS

\uD83D\uDCD8 Instructions

To onboard devices on the EMDMS portal, follow these steps;

1. Login to the EMDMS admin portal on https://nimc-emdms.seamfix.com/smartmdm/ with these test credentials.

   1. Username - haguonye@seamfix.com

   2. Password - Aa123456@

Fig1: Enter valid Login credentials to access the portal

2. Navigate to the EMDMS Enrolment module. The EMDMs enrolment module contains information about how to get the EMDMS app and the list of all activated devices from CBS

Fig. 2: Showing details about the EMDMS Enrolment page

2a. Upon clicking “Get EMDMS”, the admin is able to access the EMDMS APK to be installed

Fig.3: Showing details of the EMDMS apk file.

Fig.4: Scan QR code view.

There are two ways to set up the EMDMS app on a mobile device.

1. The QR Code method

2. The apk file download method.

The QR Code Method

Steps to set up the device using the QR code method;

1. For a new new device,

   1. Turn on the device

   2. On the Get started page (the page where you’d be required to set up your language preference & email), don’t click on “start” rather tap on the page about 6 times consequitively to launch the QR scanner

2. For a device already in use,

   1. Factory reset the device

   2. On the Get started page (the page where you’d be required to set up your language preference & email), don’t click on “start” rather tap on the page about 6 times consecutively to launch the QR scanner

3. Point the QR scanner (the camera view on the device) to the QR code shown in Fig. 4 above. If the QR code scanned is the correct one, the device will redirect you to the WiFi set-up page to enable you to set up an internet connection on the device to complete the download & installation of the EMDMS app

Fig. 5: Turn on the device's WiFi connection

4a. Complete device set up - This page displays a prompt notifying you that the admin is going to be managed henceforth by their organization

Fig. 6: Accept the permission to set up the device in management mode

4b. Complete device set up - The EMDMS app provisions the device in full management mode

Fig. 7: Provision device in full management mode

4c. Upon successfully provisioning the devices as shown in Fig. 5 & 6 above, the user will be required to launch the SmartMDM app from the list of apps.

Fig. 8: Launch NIMC EMDMS from the list of apps.

Fig. 9: Grant usage access permission

Fig. 10: Click on the NIMC EMDMS to allow access

Fig. 11: Toggle on the icon

5. Device specification check

Fig. 12: App home page

6. Device specification check report

Fig. 13a: Failed device specification check

As earlier stated, devices that do not meet the minimum device specification check will not be allowed to proceed from this page. However, the admin can manually approve this request on the portal for the user.

Fig. 13b: showing the view on the portal where an admin can approve device requests

Fig. 13c: showing the actions - Approve & Decline

Fig. 13d: Showing results for declined enrolment requests

Fig. 13e: Showing results for approved EMDMS Enrolment request

7. Trigger the NIMC AES to start downloading on the device.

Fig. 14: Downloading the NIMC AES on the device

8. Upon successfully downloading the NIMC AES app, download grant usage access to the NIMC app (Fig. 15) & then fill out the device activation request form (Fig.16) to complete the EMDMS enrolment process

Fig. 15: Grant usage access to the NIMC AES

Fig. 16: Fill out the device activation request form

Fig. 17: The list of all enrolled devices pulled from CBS

Important things to note on the device upon successfully completing the onboarding process.

• The user will be able to take a tour of the app to understand the basic navigation

• You should get a prompt on the notification tray displaying the download progress of apps that have been added by the organization.

• On the apps menu on the app, the user will be able to view the apps on the device including those installed & those pending installation

MANAGING DEVICES ON THE EMDMS

The EMDMS Dashboard -

This module shows basic analytics of all the activities happening within the ecosystem. This is a dynamic module so the analytics displayed on this page is configurable. To access the dashboard, follow these steps;

1. Login to the EMDMS portal with valid credentials

2. The user will be redirected to the EMDMS dashboard

Fig. 20: Showing the EMDMS admin dashboard

The EMDMS Device Locator -

The EMDMS device locator shows the distribution of devices across the different locations on a map view. To access the module;

1. Login with valid credentials

2. Navigate to the EMDMS Device Locator

3. On the map view, look for the location where the device is being used, Click on the location icon to view more details about the device

Fig. 21: Showing device location across their various locations on a map.

EMDMS Users -

The EMDMS user module enables the admin to create users on the EMDMS portal and assign them roles. There are basically two roles on the EMDMS portal. The Admin role & the agent role. Only the admin users can access the EMDMS portal and perform device management functions. The agent users on the other hand only have access to their assigned devices.

EMDMS Policies -

policies contain a set of restrictions that the IT admin can apply to devices to enforce compliance. To access policies,

1. Login with valid credentials

2. Select EMDMS policies

3. From the list of policies, select policies to apply to specific devices.

Fig. 22: Showing the list of available policies on the portal

Geofencing -

Geofences are the locations listed for a device(s) at the point of activation. These locations are not created on the EMDMS portal. Once a device is successfully onboarded on the EMDMS, the location assigned to that device will be displayed on the EMDMS “Geofences” policy. To access the listed geofences, follow these steps

1. Login to the EMDMS portal

2. Navigate to EMDMS policies

3. Select “Geofences” from the list of policies displayed (see Fig. 22 above). The admin will be able to view all the geofences available within the ecosystem.

Fig. 23: showing all geofeneces with their corresponding coordinates

It is not enough to retrieve the geofences. It needs to be enforced. Enforcing a geofence means that users within that location will not be able to perform any actions on their devices for the period of the geofence action.

The following policies must be applied to your devices before geofence can be enforced.

1. Enable Location Tracking

2. Enforce Location tracking

3. Enforce Geofence

Geofence Blacklist -

This feature enables the admin to be able to blacklist an entire geofence. To achieve this follow these steps;

1. Login to the portal,

2. Navigate to the EMDMS policies module (see Fig. 22)

3. Select “Geofences” from the list of policies

4. Select the location you intend to blacklist from the options displayed (see Fig. 23)

5. Click the “actions” icon by the location of your choice and select the option “blacklist (see Fig. 24 below)

Fig. 24a: Showing the “blacklist” geofence option

Fig. 24b: Device locked due to blacklisted geofence

Geofence Waiver

Geofence waiver can be used when an admin decides that despite the initial geofence assigned to a device, they want the user to be able to use the device in a new location which is not the user’s original geofence for a while. To apply the waiver policy, follow these steps;

1. Login to the portal

2. Navigate to Policies

3. Select the “Geofence Waiver” policy from the list of policies displayed (see fig. 22 above). If you have created waiver locations, the list of locations that you have created will be displayed on the geofence waiver page. Otherwise, you will be required to create a new location.

   1. Enter the correct Latitude & the Longitude coordinates location & click save geofence (see fig. 25)

   2. The new location will be displayed on the table as a list of geofence locations

4. To apply the location to a device,

   1. Navigate to actions,

   2. select the “apply to devices” option (see fig. 26)

   3. select how long you want this device to be usable in this new location (see fig. 27)

Fig. 25: Enter coordinates (lat & long)

Fig. 26: Geofence waiver locations

Fig. 27: Select the duration of the waiver

Applications Management

The applications management module enables the admin to be able to manage applications usage & transfer within the NIMC ecosystem. amongst other things, you’d be able to

• Blacklist an unauthorized app

• Uninstall an unauthorized app

• Add a new app version and push the upgrade via OTA (Over-the-air) app upgrade

• Monitor the app usage including - total data consumed, screentime spent on an app.

Add a new app

To add a new app, follow these steps;

1. Navigate to the Applications Management module

2. Click on the “Add new app” button

Fig. 28: Add a new app

3. Fill out the form with the correct details

Fig. 29. Add details of the new app

Add a new app version

This can be used to update an app version. To add a new version, follow the steps below;

1. Navigate to the applications management module

2. From the list of apps, select the app version to update

   1. Select action > add a new app version (see fig. 30) below

Fig. 30: Add a new app version

3. fill out the new app version page

Fig. 31: Fill out the form to add a new app version